RIFF JTAG – Easy repair Sony Xperia Tipo Dual ST21i2 (Sony Tapioca DS) supported

RIFF JTAG – Easy repair Sony Xperia Tipo Dual ST21i2 (Sony Tapioca DS)  supported

Repairing bricked SE ST21i2 is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence may be required.
In case you have no USB cable near, make sure battery is charged enough and hold Power On button during initiation of JTAG connection.

To resurrect SE ST21i2:

  •  Solder JTAG cable to SE ST21i2 JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure SE ST21i2 is selected in the list of models;
  •  If you use battery, press Power On key;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.
sony_xperia_tipo_dual

RIFF JTAG – Easy repair Samsung Galaxy Tab 7.7 Plus SC-01E supported

RIFF JTAG – Easy repair Samsung Galaxy Tab 7.7 Plus SC-01E supported

Repairing bricked Samsung SC-01E is easy with the RIFF Box. The device is based on the 2nd-generation Qualcomm MSM8260 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect Samsung SC-01E:

  •  Solder JTAG cable to Samsung SC-01E JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung SC-01E is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press Power-On.

.
samsung_galaxy_tab_77_plus_sc-01e

RIFF JTAG – Easy repair Samsung GT-i8730 Galaxy Express supported

RIFF JTAG – Easy repair Samsung GT-i8730 Galaxy Express supported

Repairing bricked Samsung I8730 is easy with the RIFF Box.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect Samsung I8730:

  •  Solder JTAG cable to Samsung I8730 JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung I8730 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press Power-On.

.
samsung_gt-i8370_galaxy_express

RIFF JTAG – Easy repair LG P714 Optimus L7 II supported

RIFF JTAG – Easy repair LG P714 Optimus L7 II supported

Repairing bricked LG P714 is easy with the RIFF Box. But it requires non-beginner soldering skills (since JTAG pads on board are very small and are close to each other).

To resurrect LG P714:

  •  Solder JTAG cable to LG P714 JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure LG P714 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.
lg_p710_optimus_l7_ii

RIFF JTAG – Easy repair LG F240L Optimus G Pro 5.5 supported

RIFF JTAG – Easy repair LG F240L Optimus G Pro 5.5 supported

Repairing bricked LG F240L with the RIFF Box requires non-beginner soldering skills (since JTAG pads on board are very small and are close to each other).
Phone is auto powered on with USB Data Cable connected to the PC while battery is inserted. Please note, battery must be charged. If battery is not charged enough there is chance of getting 0x42 error during connection stage.

To resurrect LG F240L:

  •  Solder JTAG cable to LG F240L JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure LG F240L is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.
lg_f240_optimus_g_pro

RIFF JTAG – Easy repair Sony Xperia Miro ST23 / ST23i (Sony Mesona) supported

RIFF JTAG – Easy repair Sony Xperia Miro ST23 / ST23i (Sony Mesona) supported

Repairing bricked SE ST23i is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence may be required.
In case you have no USB cable near, make sure battery is charged enough and hold Power On button during initiation of JTAG connection.

To resurrect SE ST23i:

  •  Solder JTAG cable to SE ST23i JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure SE ST23i is selected in the list of models;
  •  If you use battery, press Power On key;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.
sony_xperia_miro

RIFF JTAG – Easy repair Sony Xperia TX LT29 / Xperia T LT29i (Sony Hayabusa) supported

RIFF JTAG – Easy repair Sony Xperia TX LT29 / Xperia T LT29i (Sony Hayabusa) supported

Repairing bricked SE LT29i is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.

To resurrect SE LT29i:

  •  Solder JTAG cable to SE LT29i JTAG pads;
  •  Insert batter and connect USB Data cable;
  •  Make sure SE LT29i is selected in the list of models;
  •  If you use only battery, press Power On key;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
.sony_xperia_gx

RIFF JTAG – Easy repair Sony Xperia S LT26 / LT26i / Arc HD (Sony Nozomi) supported

RIFF JTAG – Easy repair Sony Xperia S LT26 / LT26i / Arc HD (Sony Nozomi) supported

Repairing bricked SE LT26i is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence may be required.
In case you have no USB cable near, make sure battery is charged enough and hold Power On button during initiation of JTAG connection.

To resurrect SE LT26i:

  •  Solder JTAG cable to SE LT26i JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure SE LT26i is selected in the list of models;
  •  If you use battery, press Power On key;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.
sony_xperia_s_2

RIFF JTAG – Easy repair LG E980 Optimus G Pro 5.5 4G LTE supported

RIFF JTAG – Easy repair LG E980 Optimus G Pro 5.5 4G LTE supported

Repairing bricked LG E980 with the RIFF Box requires non-beginner soldering skills (since JTAG pads on board are very small and are close to each other).
Phone is auto powered on with USB Data Cable connected to the PC while battery is inserted. Please note, battery must be charged. If battery is not charged enough there is chance of getting 0x42 error during connection stage.

To resurrect LG E980:

  •  Solder JTAG cable to LG E980 JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure LG E980 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods

To enter emergency mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold both ‘Volume down’ and ‘Camera’ keys and press ‘Power ON’ button.

.
lg_e980_optimus_g_pro_2

RIFF JTAG – Easy repair Huawei Ascend G525-U00 supported

RIFF JTAG – Easy repair Huawei Ascend G525-U00 supported

Repairing bricked Huawei G525 is easy with the RIFF Box.

To resurrect Huawei G525:

  •  Solder JTAG cable to Huawei G525 JTAG pads;
  •  Connect Huawei G525 tablet’s charger for power;
  •  Make sure Huawei G525 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

Now device is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.
huawei_ascend_g525_u00