RIFF JTAG – Easy repair Karbonn S5 Titanium supported
Repairing bricked Karbonn S5 is easy with the RIFF Box.
To resurrect Karbonn S5:
- Solder JTAG cable to Karbonn S5 JTAG pads;
- Make sure Karbonn S5 is selected in the list of models;
- If you use battery, press Power On key;
- Click Resurrect button;
- Wait till software signals a successful operation completion;
- Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.