RIFF JTAG – Huawei Ascend G300 (Huawei U8815) Unbrick – Dead Boot Repair Supported

19.11.2012  RIFF JTAG – Huawei Ascend G300 (Huawei U8815) Unbrick – Dead Boot Repair Supported

Repairing bricked Huawei U8815 is easy with the RIFF Box.

To resurrect Huawei U8815:

  •  Solder JTAG cable to Huawei U8815 JTAG pads;
  •  Connect Huawei U8815 tablet’s charger for power;
  •  Make sure Huawei U8815 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

Now device is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.