16.11.2012 RIFF JTAG – Huawei U2800 Unbrick – Dead Boot Repair Supported
Repairing bricked Huawei U2800 is easy with the RIFF Box.
To resurrect Huawei U2800:
- Solder JTAG cable to Huawei U2800 JTAG pads;
- Connect Huawei U2800 tablet’s charger for power;
- Make sure Huawei U2800 is selected in the list of models;
- Click Resurrect button;
- Wait till software signals a successful operation completion;
- De-solder JTAG wires;
Now device is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.