RIFF JTAG – LG SH860 Supported

Posted on by

24.10.2011  LG SH860 Supported


Resurrecting LG SH860 is easy. To establish connector battery must be connected and Power On key to be pressed.

To resurrect LG SH860:

  •  Solder JTAG cable to LG SH860 JTAG pads;
  •  Insert battery;
  •  Make sure LG SH860 is selected in the list of models;
  •  Click Resurrect button;
  •  Press ‘Power ON’ key;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter emergency mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘5’ key and press ‘Power ON’ button. In few seconds you should see emergency mode screen.