RIFF Box Files

To start working with RIFF JTAG Box, You’ll need to download initial setup:

RIFF Box JTAG Manager software setup

This will install following files to Your computer:

  • JTAG Manager software v1.88
  • RIFF Box control port driver
  • RIFF Box update port driver
  • RIFF DCC USBLoader driver
  • QUALCOMM QHUSB_DLOAD driver
  • NXP LPC Device USB driver

RIFF Box software portable archive:

RIFF JTAG Manager v1.76
Contains JTAG Manager v1.76 and RIFF Box drivers. Just extract the archive to desired directory and start using it.

You may need to install following Microsoft software:

Visual C++ 2005 Redistributable Package for (X86)

Visual C++ 2005 Redistributable Packager for (x64)

After You execute setup, it will install all files to desired destination, and launch drivers installer script.
Take note, If You’re using Windows XP, You’ll have to provide drivers location to Hardware Installation Wizard after connecting devices for first time.

RIF Box –  Starting Up

RIFF JTAG – JTAG Manager v1.13, JTAG Firmware v1.13 released

27.08.2010 JTAG Manager v1.13, JTAG Firmware v1.13 released

Whats new:

JTAG Manger 1.13
———————
– Added feature to display FLASH chip capacity information
– Added feature ‘Auto FullFlash size’ to DCC Read/Write page for simplified Full Images reading/writting
– Fixed DCC Loader Settings dialog
– Added resurrector interface function ‘GetChipSize’ which now enables resurrector DLL to receive target’s memory size
for proper data selection for flashing (like in Huawei Modem E1550 64/128MB versions);

Firmware 1.13
———————
– fixed ARM9 core debug capabilities when core is in Thumb mode
(when ARM9 core was entering debug from Thumb state some CPSR register’s flags were lost, same was when core was leaving debug into Thumb mode);
– FFFFFFEE instruction was added into HAS scripts processing module;

Click “Check for Updates” button to download new JTAG Manager and JTAG firmware.