RIFF JTAG – CDMA HTC Droid Eris, Unbrick, Boot Repair, ModelID repair supported

12.04.2011   CDMA HTC Droid Eris, Unbrick, Boot Repair, ModelID repair supported

Resurrecting HTC Droid Eris is easy. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PB0010000’.

To resurrect HTC Droid Eris:

  • Solder JTAG cable to HTC Droid Eris JTAG pads;
  • Insert USB Data cable into board and PC;
  • Make sure HTC Droid Eris is selected in the list of models;
  • If you use battery, press Power On key;
  • Click Resurrect button;
  • Wait till software signals a successful operation completion;
  • Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

  • Disconnect PC cable;
  • Insert battery;
  • Hold ‘Volume down’ key and press ‘Power ON’ button to enter HBoot menu;
  • Hold ‘Volume up’ key and press ‘Power ON’ button to enter Recovery mode;

Manual Activation of the phone (in case you see Activation screen and phone is unable to make call to retrieve settings automatically):

  • Press Emergency Call;
  • Dial ##778 and press Call key;
  • Tap “Edit Mode”;
  • Enter password “000000”;
  • Tap NAM Settings;
  • Enter your 10 digit phone number and tap OK;
  • Tap NAM1 and enter your 7 digit cell phone number without area code;
  • Tap NAM2 and enter your 3 digit area code;
  • Tap Back;
  • Tap SID/NID Settings and change the left box to 40 and leave right box as it is and then tap OK;
  • Tap Menu;
  • Tap Commit Mod: after this phone will restart in 10 seconds and will bypass the main activation screen.

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

RIFF JTAG – HTC 7 Mozart Unbrick, Unlock, IMEI Repair, CID Repair, ModelID Repair supported

09.04.2011    HTC 7 Mozart Unbrick, Unlock, IMEI Repair, CID Repair, ModelID Repair supported

Resurrecting HTC Mozart is easy. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
In case you have no USB cable near, make sure battery is charged enough and hold Power On button during initiation of JTAG connection.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 0.60.1000 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PD6710000’.

To resurrect HTC Mozart:

  • Solder JTAG cable to HTC Mozart JTAG pads;
  • Insert USB Data cable into board and PC;
  • Make sure HTC Mozart is selected in the list of models;
  • If you use battery, press Power On key;
  • Click Resurrect button;
  • Wait till software signals a successful operation completion;
  • Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

  • Disconnect PC cable;
  • Insert battery;
  • Hold ‘Volume Down’ key and press ‘Power ON’ button.

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

RIFF JTAG – HTC Ozone XV6175 (HTC Chief) Unbrick, Boot Repair, Unlock, IMEI Repair, CID Update supported

31.03.2011    HTC Ozone XV6175 (HTC Chief) Unbrick, Boot Repair, Unlock, IMEI Repair, CID Update supported

Resurrecting HTC Chief is easy:
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 0.44.0000 SPL version.
Additionally, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘CEDA10000’.
As well, you can change CID – for this make sure ‘Repair Custom ID’ field is checked in the Resurrection Guide dialog.

To resurrect HTC Chief:

  • Solder JTAG cable to HTC Chief JTAG pads;
  • Make sure HTC Chief is selected in the list of models;
  • Insert battery and connect USB Cable;
  • Click Resurrect button;
  • Wait till software signals a successful operation completion;
  • Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

RIFF JTAG – HTC Snap-Maple120 Unlock/Unbrick/IMEI Change/CID Change supported

17.10.2010  HTC  Snap-Maple120 Unlock/Unbrick/IMEI Change/CID Change supported

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.

“HTC_snap.dll” contains pinout, repair instructions and required repair files for direct HTC Snap Maple120 unlock, unbrick, IMEI repair and CID Change.

RIFF JTAG – HTC Nexus One Unlock/Unbrick/IMEI Repair supported

22.09.2010  HTC Nexus One Unlock/Unbrick/IMEI Repair supported

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.

“HTC_Nexus.dll” contains pinout, repair instructions and required files for single click HTC Nexus One Unlock, Unbrick, IMEI repair.

RIFF JTAG – HTC Desire Unlock, Unbrick, IMEI repair supported

03.09.2010 HTC Desire Unlock, Unbrick, IMEI repair supported

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“HTC_Desire.dll” contains pinout, repair instructions and required files for single click HTC Desire Unlock, Unbrick, IMEI repair.

RIFF JTAG – HTC HD2 LEO Direct Unlock added

02.09.2010 HTC HD2 LEO Direct Unlock supported

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“HTC_HD2.dll” contains pinout, repair instructions and required repair files for direct HTC HD2 LEO unlock, unbrick and IMEI repair.

RIFF JTAG – HTC SAPP300 (G2) Unbrick/Repair supported

27.08.2010 – HTC Magic32 – SAPP300 – G2 unbrick/repair IMEI supported

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“HTC_Magic32A.dll” contains pinout, repair instructions and required repair files for both “Sapphire100” and “Sapphire300” HTC Magic32A G2 phones.

RIFF JTAG – HTC Herald Unbrick, dead boot repair

06.08.2010 RIFF JTAG – HTC Herald Unbrick, dead boot repair

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL-s, download it and restart the software.“HTC_Herald.dll” contains pinout, repair instructions and required repair files for HTC Herald Unbrick, dead boot repair.

Shops where You can unbrick Your bricked phone! RIFF Box owners list.

This is official list of RIFF Box JTAG interface owners.
If You are RIFF Box user,  You can post here Your location – Country, City and address.  You can also add Your contact info like e-mail, phone number or IM ID.

Format should be as follows :

  • Your name
  • Your country, city
  • Your address
  • Your Contact details

List of phones You can unbrick is optional.

Note that posts are moderated, and those who don’t meet required standards will be deleted.
You will need to register first, in order to post here.