RIFF JTAG – Easy repair Huawei Ascend W1-U00 supported

05.10.2013  RIFF JTAG – Easy repair Huawei Ascend W1-U00 supported

Repairing bricked Huawei W1-U00 is easy with the RIFF Box.

To resurrect Huawei W1-U00:

  •  Solder JTAG cable to Huawei W1-U00 JTAG pads;
  •  Connect Huawei W1-U00 tablet’s charger for power;
  •  Make sure Huawei W1-U00 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

Now device is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

  •  Disconnect PC cable;
  •  Copy ‘dload’ folder from firmware update package to SD card root;
  •  Insert SD card into the SD slot;
  •  Insert battery;
  •  Hold both ‘Volume Down’ and ‘Volume up’ keys and press Power-On.

.
huawei_ascend_w1

RIFF JTAG – Easy repair LG E988 Optimus G Pro 5.5 4G LTE supported

05.10.2013   RIFF JTAG – Easy repair LG E988 Optimus G Pro 5.5 4G LTE supported

Repairing bricked LG E988 with the RIFF Box requires non-beginner soldering skills (since JTAG pads on board are very small and are close to each other).
Phone is auto powered on with USB Data Cable connected to the PC while battery is inserted. Please note, battery must be charged. If battery is not charged enough there is chance of getting 0x42 error during connection stage.

To resurrect LG E988:

  •  Solder JTAG cable to LG E988 JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure LG E988 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods

To enter emergency mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold both ‘Volume down’ and ‘Camera’ keys and press ‘Power ON’ button.

.
lg_e989_optimus_g_pro

RIFF JTAG – Easy repair LG LU6200 Optimus LT supported

05.10.2013   RIFF JTAG – Easy repair LG LU6200 Optimus LT supported

Repairing bricked LG LU6200 is easy with the RIFF Box.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect LG LU6200:

  •  Solder JTAG cable to LG LU6200 JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure LG LU6200 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press Power-On.

.
lg_lu6200

RIFF Box Dealers

Producer :  Narry Telecom

For bulk orders contact Mr Narry:

City: Hongkong
Email:  newtongsm@yahoo.com
ICQ: 26978092
Sonork : 100.36715

Stock Available: Yes


Hams

SimSim Electronics, Dubai , UAE
Tel.: +971 4 2727113
GSM: +971 50 6744442
ICQ: 129081860
E-mail: simsim@simsim.ae
Web Page:  www.simsim.ae
Stock Available: Yes

FoneFunShop Ltd.

 

UK / Europe / USA

 

Tel: +44 (0)871 8724557

sonork: 100.77478

E-mail: sales@fonefunshop.co.uk

Web Page: www.fonefunshop.co.uk

Stock Available: Yes


Multi-COM Ltd.

 

Poland and Europe

e-mail: biuro@multi-com.pl
ICQ: 269559399
Sonork: 100.79167
Tel. +48-17-2270-025

Web page: www.multi-com.pl
Stock Available: Yes


GsmServer

Hong Kong and worldwide

 

Country: Hong Kong
Tel: +85239733882
Fax: +85235868535
Email: info@gsmserver.com
MSN: yuliya@gsmserver.com
ICQ: 220705240
Sonork: 100.1587356
Yahoo: george_gsmserver
Skype: gsmserver.com
Web page: www.gsmserver.com

Stock Available: Yes


Name: Nadim Raza
Company Name: Raza Electronics®
City : KOLKATA (West Bengal)
Country : INDIA
Phone : +91 9831133133
ICQ : 281889574
Sonork : 100.1594719
YM : nadim_raza2001@yahoo.com
Gmail: nadimraza@gmail.com
Skype : nadimraza
QQ : 2593031503
WEB: www.razagsm.com
WEB: www.g2mark.com
Stock Available: Yes


SHARKGSM(ChinaShark)
ADD:Room 4FB039,NanFang DaSha building, CiDi 2  Road,Guangzhou,China
Tel:+86-020-62796867;62797058
Phone/Wechat/whatsAPP:+86-13580417518;+86- 13710642468
MSN/Email:gsmshark@hotmail.com
ICQ:224030476
QQ:183274092
SONORK:100.110681
Skype:youkiloon
Website1:www.sharkgsm.com
website2:www.youkiloon.com
Country :China
Stock Available: Yes

UNLOCKEAR.COM (Worldwide Distributor)

Persona de contacto: Dennis M. Palacios (DeMPaFi)
Dirección: Honduras, Tegucigalpa
Teléfono: 504-7215-2493
TeleFax: 504-2213-1615
Móvil: 504-3208-1423
Yahoo: todoinnovacion@yahoo.com
MSN: todoinnovacionhn@hotmail.com
ICQ: 609139703
Sonork: 100.1623100
QQ: 1504916548
Skype: todoinnovacion
WhatsApp: +50432081423 / +50499061023
Hangouts: unlockear@gmail.com
Web: www.unlockear.com
Web: www.todoinnovacion.com
FaceBook: www.facebook.com/dempafi
Twitter: @todoinnovacion
Stock Available: Yes


BHARATH MOBILES
J.RAVI SHANKAR,B.E,
India/Tamil nadu
Phone: 9942434855
Sonork: 100.1596786
Yahoo: mail2jravi@yahoo.com
Google: baarathmobiles@gmail.com
Home page :www.bharathunlockers.com
Stock Available: Yes


CellCorner USA

Location: USA, Miami
E-mail: support@cellcorner.com
Skype: Cellcorner.com, alexevich1
Phone: +1 (561) 921-5149
Web: www.cellcorner.com
Stock Available: Yes


RIFF Box Files

To start working with RIFF JTAG Box, You’ll need to download initial setup:

RIFF Box JTAG Manager software setup

This will install following files to Your computer:

  • JTAG Manager software v1.84
  • RIFF Box control port driver
  • RIFF Box update port driver
  • RIFF DCC USBLoader driver
  • QUALCOMM QHUSB_DLOAD driver
  • NXP LPC Device USB driver

RIFF Box software portable archive:

RIFF JTAG Manager v1.76
Contains JTAG Manager v1.76 and RIFF Box drivers. Just extract the archive to desired directory and start using it.

You may need to install following Microsoft software:

Visual C++ 2005 Redistributable Package for (X86)

Visual C++ 2005 Redistributable Packager for (x64)

After You execute setup, it will install all files to desired destination, and launch drivers installer script.
Take note, If You’re using Windows XP, You’ll have to provide drivers location to Hardware Installation Wizard after connecting devices for first time.

RIF Box –  Starting Up

RIFF JTAG – JTAG Manager v1.50 released

02.08.2013  RIFF JTAG – JTAG Manager v1.50 released

JTAG Manager 1.50
—————————

  •  Firmware update procedure is simplified now. To update box firmware user now has to click single button, no other actions are required!!! (in previous versions update firmware opration caused many questions from unexperienced users).
  •  Update server moved to new host. Thus, Check Updates for Updates button will now work correctly.
  •  Numlock key recognition is added so now additional keypad can be used to enter digits 0..9 into decimal fields (like address/length fields)

You can also download installer package from here:

JTAG Manager v1.50

You may need to install following Microsoft software:

Visual C++ 2005 Redistributable Package for (X86)

Visual C++ 2005 Redistributable Packager for (x64)

RIFF JTAG – RIFF JTAG Manager v1.49, RIFF Box Firmware v1.35 released (Cortex-A15, Cortex-A5)

24.04.2013   RIFF JTAG – RIFF JTAG Manager v1.49, RIFF Box Firmware v1.35 released (Cortex-A15, Cortex-A5)

Whats new:

RIFF Box Firmware v1.35

  •   Added support for Cortex-A15 and Cortex-A5 cores.
  •   Fixed emergency script issue for multi-cored Cortex MCUs: it was executed after first core was halted.

Now it is executed after all core(s) (if specified by reset strategy) are processed (halted).

 

RIFF JTAG Manager v1.49

  •   Added support for Cortex-A15 and Cortex-A5 cores.
  •   New Popup balloon is added with hints about ‘Dead Body ID is wrong’ error.
  •   Added Windows 8 support.
  •   Added “RIFFBOX on the Network” button (BOX Service Page).
    User can easily visit some main RIFFBOX’s internet locations.
  •   Some new IDCODES added to the search engine (CTRL+F)

.

riff-network

RIFF JTAG – HTC EVO Design 4G PH4430(HTC Kingdom) Unbrick, Unlock, IMEI, SuperCID repair supported

29.03.2013  HTC EVO Design 4G PH4430(HTC Kingdom) Unbrick, Unlock, IMEI, SuperCID repair supported

Repairing bricked HTC EvoDesign4G is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
Current resurrector works via USB interface thus no JTAG connection is required. You may need to install RIFF BOX DCC Loader USB Interface USB driver if you run this for the first time. Drivers are located in JTAG Manager directory (Drivers folder).
In order to connect, device must be detected by system as Qualcomm HS-USB QDLoader communication port. To force device into this mode (that is if your device is dead but there is still no USB activity when you connect it to PC with USB cable) use testpoint to disable the eMMC memory – for this shortcut specified point on the schematics to the GND during power-on stage.
Resurrector will reflash radio’s boot zones and will re-write PDA’s SPL to 1.30.0000 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PH4430000’.
There is option to reflash BOOT and RECOVERY zones.

To resurrect HTC EvoDesign4G via USB Cable:

  •  If required, use testpoint to force HS-USB QDLoader mode: for this de-power board, shortcut specified point in the schematics to GND with the help of a needle, insert USB cable into PC, wait while phone enumerates as HS-USB QDLoader and then remove the needle;
  •  Make sure USB cable is attached to the board and is connected to PC;
  •  Make sure HTC EvoDesign4G via USB is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press ‘Power ON’ button.

.
htc_evo_design_4g

RIFF JTAG – HTC EVO Design 4G / Acquire (HTC Kingdom) Unbrick, IMEI, SuperCID, Unlock repair supported

09.03.2013 RIFF JTAG – HTC EVO Design 4G / Acquire (HTC Kingdom) Unbrick, IMEI, SuperCID, Unlock repair supported

Repairing bricked HTC EvoDesign4G is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
Current resurrector works via USB interface thus no JTAG connection is required. You may need to install RIFF BOX DCC Loader USB Interface USB driver if you run this for the first time. Drivers are located in JTAG Manager directory (Drivers folder).
In order to connect, device must be detected by system as Qualcomm HS-USB QDLoader communication port. To force device into this mode (that is if your device is dead but there is still no USB activity when you connect it to PC with USB cable) use testpoint to disable the eMMC memory – for this shortcut specified point on the schematics to the GND during power-on stage.
Resurrector will reflash radio’s boot zones and will re-write PDA’s SPL to 1.30.0000 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PH4410000’.
There is option to reflash BOOT and RECOVERY zones.

To resurrect HTC EvoDesign4G via USB Cable:

  •  If required, use testpoint to force HS-USB QDLoader mode: for this de-power board, shortcut specified point in the schematics to GND with the help of a needle, insert USB cable into PC, wait while phone enumerates as HS-USB QDLoader and then remove the needle;
  •  Make sure USB cable is attached to the board and is connected to PC;
  •  Make sure HTC EvoDesign4G via USB is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press ‘Power ON’ button.

.
htc_evo_design_4g

RIFF JTAG – Samsung Exynos 4412 QUADCORE Supported

09.03.2013 RIFF JTAG – Samsung Exynos 4412 QUADCORE Supported

Resurrector Exynos4412 eMMC0 contains only DCC Loader, thus it is to be used only for operations on DCC Read/Write page in the JTAG Manager, or with eMMC Plugin.
DCC Loader expects eMMC memory to be connected to the SDCC controller #0.

Please note that only nonsecured MCU-s will work (DBGEN=1). In case that MCU is secured, HALT operatoion will fail with error 0x44.

Exynos-4412