RIFF JTAG – Pantech SKY VEGA S5 A840S Unbrick – Dead Boot repair supported

RIFF JTAG – Pantech SKY VEGA S5 A840S Unbrick – Dead Boot repair supported

 

Repairing bricked Pantech A840S is easy with the RIFF Box.

To resurrect Pantech A840S:

  •  Solder JTAG cable to Pantech A840S JTAG pads;
  •  Insert Pantech A840S into any USB port for power;
  •  Make sure Pantech A840S is selected in the list of models;
  •  Click Resurrect button;
  •  Select areas to be repaired in the settings window;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

.

RIFF JTAG – Pantech Vega Racer 2 LTE IM-A830L Unbrick – Dead Boot Repair Supported

16.11.2012  RIFF JTAG – Pantech Vega Racer 2 LTE IM-A830L Unbrick – Dead Boot Repair Supported

Repairing bricked Pantech A830L is easy with the RIFF Box.

To resurrect Pantech A830L:

  •  Solder JTAG cable to Pantech A830L JTAG pads;
  •  Insert Pantech A830L into any USB port for power;
  •  Make sure Pantech A830L is selected in the list of models;
  •  Click Resurrect button;
  •  Select areas to be repaired in the settings window;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

.

RIFF JTAG – Pantech Sky Vega LTE EX IM-A820L Ubrick – Dead Boot Repair Supported

08.11.2012  RIFF JTAG – Pantech Sky Vega LTE EX IM-A820L Ubrick – Dead Boot Repair Supported

Repairing bricked Pantech Sky IM-A820L is easy with the RIFF Box.
To resurrect Pantech Sky IM-A820L:

  • Solder JTAG cable to Pantech Sky IM-A820L  JTAG pads;
  • Insert Pantech Sky IM-A820L into any USB port for power;
  • Make surePantech Sky IM-A820L is selected in the list of models;
  • Click Resurrect button;
  • Select areas to be repaired in the settings window;
  • Wait till software signals a successful operation completion;
  • De-solder JTAG wires;

Now phone can enter fastboot mode and flashed with original flasher.
,

RIFF JTAG – Pantech Sky Vega LTE IM-A800s Unbrick – Dead Boot Repair Supported

08.11.2012  RIFF JTAG – Pantech Sky Vega LTE IM-A800s Unbrick – Dead Boot Repair Supported

Repairing bricked Pantech A800S is easy with the RIFF Box.

To resurrect Pantech A800S:

  •  Solder JTAG cable to Pantech A800S JTAG pads;
  •  Insert Pantech A800S into any USB port for power;
  •  Make sure Pantech A800S is selected in the list of models;
  •  Click Resurrect button;
  •  Select areas to be repaired in the settings window;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

Now phone can enter fastboot mode and flashed with original flasher.
.

RIFF JTAG – Pantech SKY Vega RACER IM-A760S Unbrick – Dead Boot Repair Supported

08.11.2012  RIFF JTAG – Pantech SKY Vega RACER IM-A760S Unbrick – Dead Boot Repair Supported

Repairing bricked Pantech A760S is easy with the RIFF Box.

To resurrect Pantech A760S:

  •  Solder JTAG cable to Pantech A760S JTAG pads;
  •  Insert Pantech A760S into any USB port for power;
  •  Make sure Pantech A760S is selected in the list of models;
  •  Click Resurrect button;
  •  Select areas to be repaired in the settings window;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

Now phone can enter fastboot mode and flashed with original flasher.
.

RIFF JTAG – Pantech Sky Vega T100K Unbrick – Dead Boot Repair Supported

08.11.2012  RIFF JTAG – Pantech Sky Vega T100K Unbrick – Dead Boot Repair Supported

Repairing bricked Pantech T100K is easy with the RIFF Box.

To resurrect Pantech T100K:

  •  Solder JTAG cable to Pantech T100K JTAG pads;
  •  Insert Pantech T100K into any USB port for power;
  •  Make sure Pantech T100K is selected in the list of models;
  •  Click Resurrect button;
  •  Select areas to be repaired in the settings window;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

Now phone can enter fastboot mode and flashed with original flasher.
.

RIFF JTAG – CDMA Pantech UM150 USB Modem supported

30.08.2011    CDMA Pantech UM150 USB Modem supported

Resurrecting CDMA USB Modem Pantech UM150 is simple. Just make sure you solder all JTAG signals and insert modem into a USB port for it to get powered.
You can select which areas to be repaired during requrrection process.

To resurrect Pantech UM150:

  •  Solder JTAG cable to Pantech UM150 JTAG pads;
  •  Insert Pantech UM150 into any USB port for power;
  •  Make sure USB Modem UM150 is selected in the list of models;
  •  Click Resurrect button;
  •  Select areas to be repaired in the settings window;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;


Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

RIFF JTAG -Sierra Wireless 597 AirCard – Unbrick – Boot repair supported

30.08.2011  Sierra Wireless 597 AirCard – Unbrick – Boot repair supported

Resurrecting CDMA USB Modem Sierra 597 is simple. Just make sure you solder all JTAG signals and insert modem into a USB port for it to get powered.
You can select which areas to be repaired during requrrection process.

To resurrect CDMA USB Modem Sierra 597:

  •  Solder JTAG cable to Sierra 597 JTAG pads;
  •  Insert Sierra 597 into any USB port for power;
  •  Make sure USB Modem 597 is selected in the list of models;
  •  Click Resurrect button;
  •  Select areas to be repaired in the settings window;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

RIFF JTAG – Sierra Wireless U595 USB Modem, Unbrick – Boot repair supported

30.08.2011  Sierra Wireless U595 USB Modem, Unbrick – Boot repair supported

Resurrecting CDMA USB Modem Sierra U595 is simple. Just make sure you solder all JTAG signals and insert modem into a USB port for it to get powered.
Please note, there is back cover detecting micro-switch present on the board: without back cover modem will not receive power. Thus, either asemble modem with soldered wires and attach back cover or hold micro-switch manually during all resurrection process.
You can select which areas to be repaired during requrrection process.

To resurrect CDMA USB Modem Sierra U595:

  •  Solder JTAG cable to Sierra U595 JTAG pads;
  •  Insert Sierra U595 into any USB port for power;
  •  Make sure USB Modem U595 is selected in the list of models;
  •  Click Resurrect button;
  •  Select areas to be repaired in the settings window;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

RIFF JTAG – Qtek 9000 (HTC Universal) Unbrick – Boot repair supported

15.07.2011  Qtek 9000 (HTC Universal) Unbrick – Boot repair supported

Current resurrector works with Qtek 9000 with MDOC G3 memory version. In order to establish JTAG connection charged battery is required. In some cases you will need to press power on key during initiating connection.
Please note, in case the Download Mode Initiation resurrection way is selected in the resurrector popup settings window, battery must be charged enough in order for phone to enter download mode.

Current resurrector offers 2 ways to resurrect the phone:

  •  WAY1: Writing SPL code directly into the MDOC memory (there are 2 hardware versions of the Qtek 9000 exist: boards with G4-type MDOC memory and boards with G3-type MDOC memory; current resurrector contains DCC Loader for G3 MDOC memory; thus for G4 version you need to use other resurrector)

 

  •  WAY2: Initiating DOWNLOAD MODE without touching MDOC contents;

MDOC G3 memory has security features, due to which there is a risk of permanently blocking the access to the flash memory while re-flashing the IPL loader. Current resurrector will not touch the IPL zone, but it is possible you’re already holding such killed device in hands. If it is so you will see this error:

****************************************************************
Detected a Not Initialized FLASH1 Chip ID: 0x0200/0xFDFF
ERROR: Selected FLASH Chip was not initialized by the DCC Loader
****************************************************************
In this case resurrection of your device is not possible. We advise you to solder a new flash memory chip and then use resurrector with IPL re-flash enabled.
To resurrect Qtek 9000 G3:

  •  Solder JTAG cable to Qtek 9000 G3 JTAG pads;
  •  Insert battery and connect USB cable to phone and PC;
  •  Make sure Qtek 9000 G3 is selected in the list of models;
  •  Click Resurrect button;
  •  In popup window select desired way of resurrection;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold both ‘Light’ key (the one near to the volume slider) and ‘Power On’ key and press with stylus the reset hole-button.

Additional info:

  •  The DiskOnChip G3 memory type has security features. Access to both protected partitions (as IPL loader area) is done using password 00000000.
  •  IPL re-flash is intentionally switched off in this resurrector. While re-flashing the IPL area there is a risk of permanently blocking the memory chip.
  •  Memory is two DiskOnChip (MDOC) G3 cascaded chips, IDs are 0x0200; capacity is 64Mb+64Mb); though current DCC Loader was tested to read/write correctly only the SPL zones.

 

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.