RIFF JTAG – HTC Tattoo A3232 (HTC Click 1100) Unlock, Unbrick, IMEI repair, CID Update

10.03.2011 HTC Tattoo A3232 (HTC Click 1100) Unlock, Unbrick, IMEI repair, CID Update supported

Resurrecting HTC Click is easy. Phone is auto powered on with USB Data Cable connected to the PC while battery is inside.
There are two different hardware versions exist – one based on the MSM7225 chipset (CLIC10000) and other – on the ESM7225 chipset (CLIC11000). In resurrector settings you can select a desired version.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 0.52.0001 SPL version.
As well, you can change CID – for this make sure ‘Repair Custom ID’ field is checked in the Resurrection Guide dialog.

To resurrect HTC Click:

  • Solder JTAG cable to HTC Click JTAG pads;
  • Make sure HTC Click is selected in the list of models;
  • Click Resurrect button;
  • Wait till software signals a successful operation completion;
  • Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To Unlock HTC Click :

  • Solder JTAG cable to HTC Click JTAG pads;
  • Make sure HTC Click is selected in the list of models;
  • Click Resurrect button;
  • Select “Unlock Settings” TAB
  • Select Unlock method
  • Click “Unlock”

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

RIFF JTAG – HTC Tattoo – HTC Click100 Unlock, Unbrick, IMEI Change, CID Change supported

18.10.2010 HTC Tattoo – HTC Click100 Unlock, Unbrick, IMEI Change, CID Change supported

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.

“HTC_Tattoo.dll” contains pinout, repair instructions and required repair files for direct HTC Tatto – HTC Click100 unlock, unbrick, IMEI repair and CID Change.