14.11.2012 RIFF JTAG – Samsung GT-i8350 Omnia W Unbrick – Dead Boot Repair Supported
Repairing bricked Samsung I8350 is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
To resurrect Samsung I8350:
- Solder JTAG cable to Samsung I8350 JTAG pads;
- Make sure Samsung I8350 is selected in the list of models;
- Insert battery and connect USB Data cable;
- If you use only battery, press Power On key;
- Click Resurrect button;
- Wait till software signals a successful operation completion;
- Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
To enter download mode:
- Disconnect PC cable;
- Insert battery;
- Hold both ‘Volume Down’ and ‘Camera’ keys and press ‘Power ON’ button.