RIFF JTAG – Samsung SC-05D Galaxy Note LTE Unbrick – Dead Boot repair supported

Posted on by

29.11.2012    RIFF JTAG – Samsung SC-05D Galaxy Note LTE Unbrick – Dead Boot repair supported

Repairing bricked Samsung SC-05D is easy with the RIFF Box. The device is based on the Qualcomm APQ8060 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect Samsung SC-05D:

  •  Solder JTAG cable to Samsung SC-05D JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung SC-05D is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press Power-On.

.