RIFF JTAG – Easy repair CDMA ZTE S183 supported
Resurrecting ZTE S183 is simple. Phone is auto powered on with USB Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
Current resurrector contains Firmware and EEPROM zones for memory chip with ID 0x017E/0x0063.
To resurrect ZTE S183:
- Solder JTAG cable to ZTE S183 JTAG pads;
- Insert USB Data cable into board and PC;
- Make sure ZTE S183 is selected in the list of models;
- Click Resurrect button;
- Choose which areas to flash;
- Wait till software signals a successful operation completion;
- De-solder JTAG wires;