RIFF JTAG – Easy repair LG P715 Optimus L7 II Dual supported

05.10.2013  RIFF JTAG – Easy repair LG P715 Optimus L7 II Dual supported

Repairing bricked LG P715 is easy with the RIFF Box. But it requires non-beginner soldering skills (since JTAG pads on board are very small and are close to each other).

To resurrect LG P715:

  •  Solder JTAG cable to LG P715 JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure LG P715 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.
lg_p715_optimus_l7_ii