10.08.2013 RIFF JTAG – Huawei Ascend G510 boot repair supported
Repairing bricked Huawei G510 is easy with the RIFF Box.
To resurrect Huawei G510:
- Solder JTAG cable to Huawei G510 JTAG pads;
- Connect Huawei G510 tablet’s charger for power;
- Make sure Huawei G510 is selected in the list of models;
- Click Resurrect button;
- Wait till software signals a successful operation completion;
- De-solder JTAG wires;
Now device is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.