RIFF JTAG – Easy repair Orange Nivo 7560U supported

Resurrecting the Orange Nivo 7560U is easy.

To resurrect the Orange Nivo 7560U:

•  Solder JTAG cable to Orange Nivo 7560U JTAG pads;
•  Solder the Power Button to ground;
•  Connect power supply 4.2V to the battery connectors;
•  Make sure Orange Nivo 7560U is selected in the list of models;
•  Click Resurrect button;
•  Wait till software signals a successful operation completion;
•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.