RIFF JTAG – Easy repair Karbonn S5 Titanium supported

RIFF JTAG – Easy repair Karbonn S5 Titanium supported

Repairing bricked Karbonn S5 is easy with the RIFF Box.

To resurrect Karbonn S5:

  •  Solder JTAG cable to Karbonn S5 JTAG pads;
  •  Make sure Karbonn S5 is selected in the list of models;
  •  If you use battery, press Power On key;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

.
karbonn_s5_titanium

RIFF JTAG – Easy repair HTC One SV C520c (HTC K2) supported

RIFF JTAG – Easy repair HTC One SV C520c (HTC K2) supported

Repairing bricked HTC OneSV (PL8013000) is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence may be required.
In case you have no USB cable near, make sure battery is charged enough and hold Power On button during initiation of JTAG connection.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 2.00.0000 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PL8013000’.

To resurrect HTC OneSV:

  •  Solder JTAG cable to HTC OneSV (PL8013000) JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure HTC OneSV (PL8013000) is selected in the list of models;
  •  If you use battery, press Power On key;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press ‘Power ON’ button.

.
htc_one_sv_boost

RIFF JTAG – Easy repair ThinkPad GOBI 3000 Mobile Broadband card supported

RIFF JTAG – Easy repair ThinkPad GOBI 3000 Mobile Broadband card supported

Repairing bricked Qualcomm ThinkPad GOBI3000 is easy with the RIFF Box.

To resurrect Qualcomm ThinkPad GOBI3000:

  •  Solder JTAG cable to Qualcomm ThinkPad GOBI3000 JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure Qualcomm ThinkPad GOBI3000 is selected in the list of models;
  •  Click Resurrect button;
  •  Choose which areas to flash;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

.

gobi3000

RIFF JTAG – Easy repair HTC DROID Incredible 4G LTE (HTC Fireball) supported

RIFF JTAG – Easy repair HTC DROID Incredible 4G LTE (HTC Fireball)  supported

Repairing bricked HTC Fireball (PJ5310000) is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence may be required.
In case you have no USB cable near, make sure battery is charged enough and hold Power On button during initiation of JTAG connection.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 1.15.1111 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PJ5310000’.

To resurrect HTC Fireball:

  •  Solder JTAG cable to HTC Fireball (PJ5310000) JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure HTC Fireball (PJ5310000) is selected in the list of models;
  •  If you use battery, press Power On key;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press ‘Power ON’ button.

.
htc_droid_incredible_4g

RIFF JTAG – Easy repair LG Optimus Vu(F100L) supported

RIFF JTAG – Easy repair LG Optimus Vu(F100L) supported

Repairing bricked LG F100L is easy with the RIFF Box.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect LG F100L:

  •  Solder JTAG cable to LG F100L JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure LG F100L is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press Power-On.

.
lg_optimus_vu_ii_2

RIFF JTAG – Easy repair Samsung Galaxy S III mini SM-G730V supported

RIFF JTAG – Easy repair Samsung Galaxy S III mini SM-G730V supported

Repairing bricked Samsung G730V is easy with the RIFF Box. The device is based on the Qualcomm MSM8960 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect Samsung G730V:

  •  Solder JTAG cable to Samsung G730V JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung G730V is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press Power-On.

.
samsung_galaxy_s_iii_mini_verizon

RIFF JTAG – Easy repair Samsung Galaxy Mega 6.3 I9200 supported

RIFF JTAG – Easy repair Samsung Galaxy Mega 6.3 I9200 supported

Repairing bricked Samsung I9200 is easy with the RIFF Box.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.
During Resurrection process you can select areas to be resurrected. Select them wisely: selecting everything in one bunch may just increase flashing time while it’s possible that all you need is to repair only few certain areas.

To resurrect Samsung I9200:

  •  Solder JTAG cable to Samsung I9200 JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung I9200 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press Power-On.

.
samsung_galaxy_mega_6.3

RIFF JTAG – Easy repair Samsung Galaxy S4T L720T supported

RIFF JTAG – Easy repair Samsung Galaxy S4T L720T supported

Repairing bricked Samsung L720T is easy with the RIFF Box.
Phone is auto powered on with USB Data Cable connected to the PC while battery is inserted. Please note, battery must be charged. If battery is not charged enough there is chance of getting 0x42 error during connection stage.
During Resurrection process you can select areas to be resurrected. Select them wisely: selecting everything in one bunch may just increase flashing time while it’s possible that all you need is to repair only few certain areas.

To resurrect Samsung L720T:

  •  Solder JTAG cable to Samsung L720T JTAG pads;
  •  Connect USB cable or insert battery;
  •  Make sure Samsung L720T is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.
samsung_galaxy_s_4_2

RIFF JTAG – Easy repair Samsung Galaxy Trend (S7560) supported

RIFF JTAG – Easy repair Samsung Galaxy Trend (S7560) supported

Repairing bricked Samsung S7560 is easy with the RIFF Box.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on, so no need to press any power-on buttons on the phone keypad.

To resurrect Samsung S7560:

  •  Solder JTAG cable to Samsung S7560 JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure Samsung S7560 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ and ‘Home’ keys and press Power-On.

.
s7560

RIFF JTAG – Easy repair Samsung GALAXY Tab 10.1 LTE SC-01D supported

RIFF JTAG – Easy repair Samsung GALAXY Tab 10.1 LTE SC-01D supported

Repairing bricked Samsung SC-01D is easy with the RIFF Box. The device is based on the 2nd-generation Qualcomm MSM8260 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect Samsung SC-01D:

  •  Solder JTAG cable to Samsung SC-01D JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung SC-01D is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press Power-On.

.
samsung_galaxy_tab2_101