RIFF JTAG – Samsung SCH-i509 Galaxy Y Unbrick – Dead Boot repair supported

30.11.2012  RIFF JTAG – Samsung SCH-i509 Galaxy Y Unbrick – Dead Boot repair supported

Repairing bricked Samsung I509 is easy with the RIFF Box.To power the phone connect USB cable and insert battery. Sometimes it’s needed to press and HOLD Power On key.

To resurrect Samsung I509:

  •  Solder JTAG cable to Samsung I509 JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung I509 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

.

RIFF JTAG – Samsung SC-05D Galaxy Note LTE Unbrick – Dead Boot repair supported

29.11.2012    RIFF JTAG – Samsung SC-05D Galaxy Note LTE Unbrick – Dead Boot repair supported

Repairing bricked Samsung SC-05D is easy with the RIFF Box. The device is based on the Qualcomm APQ8060 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect Samsung SC-05D:

  •  Solder JTAG cable to Samsung SC-05D JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung SC-05D is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press Power-On.

.

RIFF JTAG – Samsung GT-N8010 Galaxy Note 10.1 WiFi Unbrick – Dead Boot repair supported

29.11.2012  RIFF JTAG – Samsung GT-N8010 Galaxy Note 10.1 WiFi Unbrick – Dead Boot repair supported

Repairing bricked Samsung N8010 is easy with the RIFF Box. The device is based on the Exynos 4412 Processor.
JTAG pads are very small; professional experience in soldering is required to connect wires to the JTAG interface.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect Samsung N8010:

  •  Solder JTAG cable to Samsung N8010 JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung N8010 is selected in the list of models;
  •  Make sure a fixed TCK frequency is selected;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press Power-On.

.

RIFF JTAG – Samsung SCH-i559 Galaxy Mini / Galaxy Pop Unbrick – Dead boot repair supported

27.11.2012   RIFF JTAG – Samsung SCH-i559 Galaxy Mini / Galaxy Pop Unbrick – Dead boot repair supported

Repairing bricked Samsung I559 is easy with the RIFF Box. To power the phone connect USB cable and insert battery. Sometimes it’s needed to press Power On key.

To resurrect Samsung I559:

  •  Solder JTAG cable to Samsung I559 JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung I559 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
.

RIFF JTAG – Samsung SPH-L710 Galaxy S III LTE Unbrick – Dead Boot repair supported

27.11.2012   RIFF JTAG – Samsung SPH-L710 Galaxy S III LTE Unbrick – Dead Boot repair supported

Repairing bricked Samsung SPH-L710 is easy with the RIFF Box. The device is based on the Qualcomm MSM8960 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect Samsung SPH-L710:

  •  Solder JTAG cable to Samsung SPH-L710 JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung SPH-L710 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press Power-On.

.

RIFF JTAG – Samsung GT-P7320 Galaxy Tab 8.9 LTE Unbrick – Dead Boot Repair Supported

13.11.2012  RIFF JTAG – Samsung GT-P7320 Galaxy Tab 8.9 LTE Unbrick – Dead Boot Repair Supported

Repairing bricked Samsung P7320 is easy with the RIFF Box. The device is based on the Qualcomm APQ8060 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect Samsung P7320:

  •  Solder JTAG cable to Samsung P7320 JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung P7320 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Up’ key (which is closest to Power-On key) and press Power-On.

.

RIFF JTAG – LG F-160S Optimus LTE2 Unbrick – Dead Boot Repair Supported

09.11.2012 RIFF JTAG – LG F-160S Optimus LTE2 Unbrick – Dead Boot Repair Supported

Repairing bricked LG F160S is easy with the RIFF Box. The device is based on the Qualcomm MSM8960 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect LG F160S:

  •  Solder JTAG cable to LG F160S JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure LG F160S is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
.

RIFF JTAG – LG F-160L Optimus LTE2 Unbrick – Dead Boot Repair Supported

09.11.2012  RIFF JTAG – LG F-160L Optimus LTE2 Unbrick – Dead Boot Repair Supported

Repairing bricked LG F160L is easy with the RIFF Box. The device is based on the Qualcomm MSM8960 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect LG F160L:

  •  Solder JTAG cable to LG F160L JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure LG F160L is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
.

RIFF JTAG – LG F-160K Optimus LTE2 Unbrick – Dead Boot Repair Supported

09.11.2012   RIFF JTAG – LG F-160K Optimus LTE2 Unbrick – Dead Boot Repair Supported

Repairing bricked LG F160K is easy with the RIFF Box. The device is based on the Qualcomm MSM8960 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect LG F160K:

  •  Solder JTAG cable to LG F160K JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure LG F160K is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
.

RIFF JTAG – Samsung GT-S5830L Galaxy Ace Unbrick – Dead Boot Repair Supported

19.10.2012   RIFF JTAG – Samsung GT-S5830L Galaxy Ace Unbrick – Dead Boot Repair Supported

Repairing bricked Samsung S5830L is easy with the RIFF Box. You need to hold Power On button during JTAG connection establishing phase.

To resurrect Samsung S5830L do this:

  •  Solder JTAG cable to Samsung S5830L JTAG pads;
  •  Insert battery and connect USB cable to phone and PC;
  •  Make sure Samsung S5830L is selected in the list of models;
  •  Click Resurrect button;
  •  Press Power On button shortly if it stops on establish conneciton stage;
  •  Wait few seconds until software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On to enter Download Mode;

.