RIFF JTAG – ZTE Skate Unbrick – Dead boot repair supported

29.03.2013 RIFF JTAG – ZTE Skate Unbrick -Dead boot repair supported

Repairing bricked ZTE SKATE is easy with the RIFF Box.

To resurrect ZTE SKATE:

  •  Solder JTAG cable to ZTE SKATE JTAG pads;
  •  Connect ZTE SKATE tablet’s charger for power;
  •  Make sure ZTE SKATE is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

Now device is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.
zte_skate

RIFF JTAG – ZTE Skate Acqua (V880) Unbrick – Dead boot repair supported

09.02.2013  RIFF JTAG – ZTE Skate Acqua (V880) Unbrick -Dead boot repair supported

Repairing bricked ZTE V880 is easy with the RIFF Box.

To resurrect ZTE V880:

  •  Solder JTAG cable to ZTE V880 JTAG pads;
  •  Make sure ZTE V880 is selected in the list of models;
  •  Connect USB Data Cable;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

.
zte_acqua