RIFF JTAG – QUALCOMM MDM6600 Generic DLL released

19.11.2011  – QUALCOMM MDM6600 NAND Generic DLL released

Whats new:

  • QUALCOMM MDM6600 NAND DLL

Use this for phones which have MDM6600 in baseband – eg LG P999, iPhone 4s, and many other phones which use TEGRA2 AP CPU.

 

  • QUALCOMM MSM7227 OneNAND DLL (2kb page)
  • QUALCOMM MSM7227 OneNAND DLL (4kb page)
  • QUALCOMM QSC6xxx OneNAND DLL

All other QUALCOMM Generic DLL-s are now under same branch, so here is full revised list :

 

  • ESM7xxx L41 D04 NAND
  • MDM6600 NAND
  • MSM6xxx L06 D02 NAND
  • MSM7227 L41 D08 OneNAND
  • MSM7227 L41 D08 OneNAND 4k
  • MSM7xxx L41 D04 NAND
  • MSM7xxx L41 D08 NAND
  • QSC1100 x14 NOR
  • QSC60xx L18 D08 NOR
  • QSC6xx L20 D08 NOR
  • QSC60xx L24 D08 NOR
  • QSC6xxx L32 D08 NAND
  • QSC6xxx L36 D08 NAND
  • QSC6xxx L36 D08 OneNAND
  • QSD8xxx L41 D04 NAND
Press “Check for updates” button in order to download and install new files.

RIFF JTAG – QUALCOMM QSC60XX Generic NOR DLL-s

Resurrector QSC60XX L24 D08 contains only DCC Loader, thus it is to be used only for operations on DCC Read/Write page in the JTAG Manager.
Embedded DCC Loader is designed to work inside of MCU’s internal RAM memory, thus it is not sensitive to external SDRAM configuration or availability or its physical state.

Initial H/W init sequence will setup MCU’s PLL with these parameters:

  • L/M/N = 0x2A/0x00/0x01;
  • Global Clock Divisor = DIV8

Resurrector QSC60XX L24 D08 contains only DCC Loader, thus it is to be used only for operations on DCC Read/Write page in the JTAG Manager.
Embedded DCC Loader is designed to work inside of MCU’s internal RAM memory, thus it is not sensitive to external SDRAM configuration or availability or its physical state.

Initial H/W init sequence will setup MCU’s PLL with these parameters:

  • L/M/N = 0x2A/0x00/0x01;
  • Global Clock Divisor = DIV8

You can use these two DLL-s with all QSC6xxx CPU devices with NOR flash.
(Any CDMA phones with Qualcomm QSC60xx CPU, with NOR flash chip)

 

RIFF JTAG – Samsung i5800 Galaxy 3 Unbrick, Dead Boot Repair supported

27.12.2010  Samsung i5800 Galaxy 3 Unbrick, Dead Boot Repair supported

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_i5800.dll” contains pinout, instructions and required repair files for Samsung i5800 Galaxy 3 Unbrick/Dead boot repair. This is also world first Samsung S5P6422 CPU supported.