RIFF JTAG – QUALCOMM MDM6600 Generic DLL released

19.11.2011  – QUALCOMM MDM6600 NAND Generic DLL released

Whats new:

  • QUALCOMM MDM6600 NAND DLL

Use this for phones which have MDM6600 in baseband – eg LG P999, iPhone 4s, and many other phones which use TEGRA2 AP CPU.

 

  • QUALCOMM MSM7227 OneNAND DLL (2kb page)
  • QUALCOMM MSM7227 OneNAND DLL (4kb page)
  • QUALCOMM QSC6xxx OneNAND DLL

All other QUALCOMM Generic DLL-s are now under same branch, so here is full revised list :

 

  • ESM7xxx L41 D04 NAND
  • MDM6600 NAND
  • MSM6xxx L06 D02 NAND
  • MSM7227 L41 D08 OneNAND
  • MSM7227 L41 D08 OneNAND 4k
  • MSM7xxx L41 D04 NAND
  • MSM7xxx L41 D08 NAND
  • QSC1100 x14 NOR
  • QSC60xx L18 D08 NOR
  • QSC6xx L20 D08 NOR
  • QSC60xx L24 D08 NOR
  • QSC6xxx L32 D08 NAND
  • QSC6xxx L36 D08 NAND
  • QSC6xxx L36 D08 OneNAND
  • QSD8xxx L41 D04 NAND
Press “Check for updates” button in order to download and install new files.

RIFF JTAG – CDMA QUALCOMM QSC1100 Generic DLL released

06.04.2011    CDMA QUALCOMM QSC1100 Generic DLL released

Resurrector QSC1100 X14 contains only DCC Loader, thus it is to be used only for operations on DCC Read/Write page in the JTAG Manager.
Embedded DCC Loader is designed to work inside of MCU’s internal RAM memory, thus it is not sensitive to external SDRAM configuration or availability or its physical state.

Initial H/W init sequence will setup MCU’s PLL with these parameters:

  • Clock Multiplier = 0x14

Since few different versions of QSC1100 resurrector may exist (with different multiplier values) you may select the one which suits best to your device.

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

RIFF JTAG – MARVELL PXA3XX NAND Generic DLL Released

21.03.2011 MARVELL PXA3XX NAND Generic DLL Released

 

  • Resurrector PXA3XX contains only NAND DCC Loader, thus it is to be used only for operations on DCC Read/Write page in the JTAG Manager.

Embedded DCC Loader is designed to work inside of MCU’s internal RAM memory, thus it is not sensitive to external SDRAM configuration or availability or its physical state.

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

RIFF JTAG – QUALCOM NAND ESM7XXX Generic DLL released

04.03.2011  QUALCOM NAND ESM7XXX Generic DLL released

Resurrector ESM7XXX L41 D04 contains only DCC Loader, thus it is to be used only for operations on DCC Read/Write page in the JTAG Manager.

Embedded DCC Loader is designed to work inside of MCU’s internal RAM memory, thus it is not sensitive to external SDRAM configuration or availability or its physical state.

Initial H/W init sequence will setup MCU’s PLL0 with these parameters:

* L/M/N = 0x41/0x00/0x01;
* Global Clock Divisor = DIV4

If you don’t know what the L, M, N or Global Clock Divisor parameters are, then just keep in mind:

* Highest L values and lowest Global Clock Divisor values will make maximum clocking frequency supplied to the MCU’s core and thus DCC Read/Write speed will be maximum fast;

* Too high frequency supplied to the MCU’s core may result in core overheating or instable operation;