RIFF JTAG – NTT DoCoMo Samsung SGH-N055 Galaxy S IV LTE SC-04E Unbrick – dead boot repair supported

31.08.2013  RIFF JTAG – NTT DoCoMo Samsung SGH-N055 Galaxy S IV LTE SC-04E Unbrick – dead boot repair supported

Repairing bricked Samsung SC-04E is easy with the RIFF Box.
Phone is auto powered on with USB Data Cable connected to the PC while battery is inserted. Please note, battery must be charged. If battery is not charged enough there is chance of getting 0x42 error during connection stage.
During Resurrection process you can select areas to be resurrected. Select them wisely: selecting everything in one bunch may just increase flashing time while it’s possible that all you need is to repair only few certain areas.

To resurrect Samsung SC-04E:

  •  Solder JTAG cable to Samsung SC-04E JTAG pads;
  •  Connect USB cable or insert battery;
  •  Make sure Samsung SC-04E is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.
s4-jap

RIFF JTAG – Samsung SGH-i337M Galaxy S 4 LTE 32GB (Samsung Altius) Unbrick Total Repair supported

10.08.2013  RIFF JTAG – Samsung SGH-i337M Galaxy S 4 LTE 32GB (Samsung Altius) Unbrick Total Repair supported

Repairing bricked Samsung I337M is easy with the RIFF Box.
Phone is auto powered on with USB Data Cable connected to the PC while battery is inserted. Please note, battery must be charged. If battery is not charged enough there is chance of getting 0x42 error during connection stage.
During Resurrection process you can select areas to be resurrected. Select them wisely: selecting everything in one bunch may just increase flashing time while it’s possible that all you need is to repair only few certain areas.

To resurrect Samsung I337M:

  •  Solder JTAG cable to Samsung I337M JTAG pads;
  •  Connect USB cable or insert battery;
  •  Make sure Samsung I337M is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.
samsung_galaxy_s_4_4

RIFF JTAG – Samsung SGH-i437 Galaxy Express Supported

03.06.2013  RIFF JTAG – Samsung SGH-i437 Galaxy Express Supported

Repairing bricked Samsung I437 is easy with the RIFF Box. The device is based on the Qualcomm MSM8960 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect Samsung I437:

  •  Solder JTAG cable to Samsung I437 JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung I437 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press Power-On.

.
samsung_sgh-i437_galaxy_express

RIFF JTAG – Samsung SGH-i337 Galaxy S 4 LTE (Samsung Altius) Supported

03.06.2013  RIFF JTAG – Samsung SGH-i337 Galaxy S 4 LTE (Samsung Altius) Supported

Repairing bricked Samsung I337 is easy with the RIFF Box.
Phone is auto powered on with USB Data Cable connected to the PC while battery is inserted. Please note, battery must be charged. If battery is not charged enough there is chance of getting 0x42 error during connection stage.

To resurrect Samsung I337:

  •  Solder JTAG cable to Samsung I337 JTAG pads;
  •  Connect USB cable or instert batteryu;
  •  Make sure Samsung I337 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.
samsung_galaxy_s_9505

RIFF JTAG – Samsung SGH-M919 Galaxy S4 (Samsung Altius) Supported

03.06.2013  RIFF JTAG – Samsung SGH-M919 Galaxy S4 (Samsung Altius) Supported

Repairing bricked Samsung M919 is easy with the RIFF Box.
Phone is auto powered on with USB Data Cable connected to the PC while battery is inserted. Please note, battery must be charged. If battery is not charged enough there is chance of getting 0x42 error during connection stage.

To resurrect Samsung M919:

  •  Solder JTAG cable to Samsung M919 JTAG pads;
  •  Connect USB cable or instert batteryu;
  •  Make sure Samsung M919 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.
samsung_galaxy_s_4_4

RIFF JTAG – Samsung SGH-T879 Galaxy Note Unbrick – Dead Boot repair supported

29.12.2012  RIFF JTAG – Samsung SGH-T879 Galaxy Note Unbrick – Dead Boot repair supported

Repairing bricked Samsung T879 is easy with the RIFF Box. The device is based on the Qualcomm APQ8060 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect Samsung T879:

  •  Solder JTAG cable to Samsung T879 JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung T879 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press Power-On.

.
t-mobile-galaxy-note

RIFF JTAG – Samsung SGH-Z710 Unbrick – Dead Boot Repair Supported

23.11.2012   RIFF JTAG – Samsung SGH-Z710 Unbrick – Dead Boot Repair Supported

Repairing bricked Samsung Z710 is easy with the RIFF Box.

To resurrect Samsung Z710:

  •  Solder JTAG cable to Samsung Z710 JTAG pads;
  •  Connect USB cable or instert batteryu;
  •  Make sure Samsung Z710 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘9’ key and press ‘Power ON’ button.

.

RIFF JTAG – Samsung SGH-L760 Unbrick – Boot Repair Supported

11.10.2012   RIFF JTAG – Samsung SGH-L760 Unbrick – Boot Repair Supported

Repairing bricked Samsung L760 is easy with the RIFF Box.

To resurrect Samsung L760:

  •  Solder JTAG cable to Samsung L760 JTAG pads;
  •  Connect USB cable or instert batteryu;
  •  Make sure Samsung L760 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘9’ key and press ‘Power ON’ button.

.

RIFF JTAG – Samsung SGH-P960 Unbrick – Dead Boot Repair Supported

05.10.2012    RIFF JTAG – Samsung SGH-P960 Unbrick – Dead Boot Repair Supported

Resurrecting Samsung P960 is simple. Phone is auto powered on with USB Data Cable connected to the PC while battery is inside. In case you use the battery only please note you will have to press Power On key once.

To resurrect Samsung P960:

  •  Solder JTAG cable to Samsung P960 JTAG pads;
  •  Make sure Samsung P960 is selected in the list of models;
  •  Insert Battery into phone and connect USB cable (in case you not use USB cable, press once the Power ON key on the phone)
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘9’ key and press ‘Power ON’ button. In few seconds phone enters download mode.

.

RIFF JTAG – Samsung SGH-i747M Galaxy S III LTE Unbrick – Boot Repair Supported

03.10.2012    RIFF JTAG – Samsung SGH-i747M Galaxy S III LTE Unbrick – Boot Repair Supported

Repairing bricked Samsung I747M is easy with the RIFF Box.The device is based on the Qualcomm MSM8960 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect Samsung I747M:

  1.  Solder JTAG cable to Samsung I747M JTAG pads;
  2.  Connect USB cable to phone and PC;
  3.  Insert battery;
  4.  Make sure Samsung I747M is selected in the list of models;
  5.  Click Resurrect button;
  6.  Wait till software signals a successful operation completion;
  7.  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press Power-On.

.