RIFF JTAG – Sierra Wireless U595 USB Modem, Unbrick – Boot repair supported

30.08.2011  Sierra Wireless U595 USB Modem, Unbrick – Boot repair supported

Resurrecting CDMA USB Modem Sierra U595 is simple. Just make sure you solder all JTAG signals and insert modem into a USB port for it to get powered.
Please note, there is back cover detecting micro-switch present on the board: without back cover modem will not receive power. Thus, either asemble modem with soldered wires and attach back cover or hold micro-switch manually during all resurrection process.
You can select which areas to be repaired during requrrection process.

To resurrect CDMA USB Modem Sierra U595:

  •  Solder JTAG cable to Sierra U595 JTAG pads;
  •  Insert Sierra U595 into any USB port for power;
  •  Make sure USB Modem U595 is selected in the list of models;
  •  Click Resurrect button;
  •  Select areas to be repaired in the settings window;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.