Tag Archives: Thumb

RIFF JTAG – JTAG Manager v1.41, RIFF Box firmware v1.31 released

Posted on by

14.03.2012   RIFF JTAG – JTAG Manager v1.41, RIFF Box firmware v1.31 released

Whats new:

 

  • RIFF Box firmware v1.31

    – APQ8060, MSM8260, MSM8660 (3rd generation Qualcomm chipsets) support is added.
    – Fixed ARM7 bug: exit from debug state into THUMB mode was corrupted.
    – Added after-halt “Emergency” script execution for ARM7 cores. 
  • RIFF JTAG Manager v1.41

    – APQ8060, MSM8260, MSM8660 (3rd generation Qualcomm chipsets) support is added.
    – Fixed SettingsCode bug which was spawned after we’ve transfered to 12-digit wide 64-bit hex numbers representation.
  •  RIFF Direct JTAG Access plugin v1.03

    – Added chipsets APQ8060, MSM8260, MSM8660
    – Added APQ8060 eMMC controllers #1..5 support
    – Added MSM8260 eMMC controllers #1..5 support
    – Added MSM8660 eMMC controllers #1..5 support

     

RIFF JTAG – JTAG Manager v1.31, RIFF Box Firmware v1.23 released

Posted on by

20.04.2011 JTAG Manager v1.31, RIFF Box Firmware v1.23 released

Whats new :

JTAG Manager 1.31

  • “RUN/STOP” Loaders functionality is added (and alternative to the DCC Loaders)

This is required for some ARM7 cores when Debug Communication Channel (DCC) to/from core is not functional (like in MSM6000)

Firmware 1.23

  • Added 8/16/32-bit bus read/write access rotuines for ARM7 core
  • ARM7 debug is now available in ARM/Thumb modes (use the GDBServer for this);

 

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

RIFF JTAG – RIFF JTAG Manager v1.24, RIFF Box Firmware v1.18 released

Posted on by

10.02.2011 RIFF JTAG Manager v1.24, RIFF Box Firmware v1.18

Firmware 1.18
—————————
– PXA270 debug is now available in ARM/Thumb modes (use the GDBServer for this);

JTAG Manager 1.24
—————————
– In case when Resurrector has no DCC Loader the JTAG Manager will now report it correctly and will not allow DCC Read/Write features
– (SDK): more functions are now available (exported) for future Resurrector DLLs;
– Usefull Plugins Enabled
—————————

Qualcom FullFlash Image Processing Tool:

This plugin works with NAND image files which have generic Qualcomm layout

With help of this plugin you can do:
– Disassemble a full NAND image file previously obtained with JTAG Manager (DCC Read/Write Page);
– Inspect each partition contents (main zone and spare zone) simultaneously;
– Save separate partitions to HDD (only main zone, only spare zone, or both zones);
– Write a chosen partition directly into phone;
– Read a chosen partition directly from the phone and substitute old partition contents to new ones;

Please note, direct read/write operations from/to the phone will require proper resurrector to be set (Resurrector Settings: thus before clicking the Activate Plugin button make sure compatible model is selected as well as other settings like TCK/RTCK frequencies).

You can access it from “Usefull Plugins” TAB :

RIFF JTAG – JTAG Manager v1.13, JTAG Firmware v1.13 released

Posted on by

27.08.2010 JTAG Manager v1.13, JTAG Firmware v1.13 released

Whats new:

JTAG Manger 1.13
———————
– Added feature to display FLASH chip capacity information
– Added feature ‘Auto FullFlash size’ to DCC Read/Write page for simplified Full Images reading/writting
– Fixed DCC Loader Settings dialog
– Added resurrector interface function ‘GetChipSize’ which now enables resurrector DLL to receive target’s memory size
for proper data selection for flashing (like in Huawei Modem E1550 64/128MB versions);

Firmware 1.13
———————
– fixed ARM9 core debug capabilities when core is in Thumb mode
(when ARM9 core was entering debug from Thumb state some CPSR register’s flags were lost, same was when core was leaving debug into Thumb mode);
– FFFFFFEE instruction was added into HAS scripts processing module;

Click “Check for Updates” button to download new JTAG Manager and JTAG firmware.